Using Help
If you are having problems with any aspect of your WeatherTRAK
ET plus controller, help is available from a HydroPoint Customer
Service Representative at the number shown in the display.
Help screens will help you to identify and troubleshoot any problems
that may occur with the WeatherTRAK ET plus controller. You may be
asked to look at these displays, write down what is stored in them
and report this information to a HydroPoint Representative. Unlike
other features, there are no entries for you to make in HELP. The
lower line of the displays shown below are typical examples of HELP
screens.
1. Turn the Function Selector knob to HELP.
The display will look like this:
2. Turn the Upper Line knob.
The display will look like this:
This is the current daily ET stored in the controller. The lower
line shows the date and time the ET was received.
3. Turn the Upper Line knob to the next position.
To Next Page
Loading...