HydroPoint WeaterTRAK ET plus - Adjust (Auto Mode Only); Manual

Quick Reference Guide
Appendix A: Quick Reference Guide
Getting Started
Site Survey
Gather the required site data for your irrigation system and
landscape parameters (e.g., precipitation rate, zone efficiency,
sprinkler type, plant type, soil type, root depth, slope amount and
sprinkler location).
Setup Controller
1. Turn the Function Selector knob to SETUP.
2. Using the Lower Line knob set the irrigation start hour.
3. Rotate the Upper Line knob to select irrigation start minute.
4. Using the Lower Line knob, select the irrigation start minute.
5. Rotate the Upper Line knob until you see “Set Clock (Year).”
6. Using the Lower Line knob, set the clock hour.
7. Continue using the Upper and Lower Line knobs to set the clock
month, day, hour, minute, time zone and max active stations.
Activate
Call HydroPoint Customer Service to activate your controller at:
(800) 362-8774. Be sure to have your completed Installation and
Program Settings worksheet available.
Schedules
The Schedule feature allows you to set the water day pattern for
your irrigation system. There are two schedules, A and B.
To set the day pattern for a schedule:
1. Turn the Function Selector knob to SCHEDULE.
2. Using the Lower Line knob select the schedule to set.
Appendix A
A
83