Review
This setting displays each station’s:
• Irrigation runtime,
• Number of cycles,
• Soak times,
• Adjustment factor expressed as a percentage and
• Operating days.
Adjust
When you set a station to “Fully Automated”, this feature
adjusts station runtimes by adjusting the percentage ET.
When in “Fully Automated” mode, you can adjust in increments
of 5% (in a range of -50% to +25%).
Rain Pause
This feature lets you shut down the controller for a specific
number of days (in a range of 1 to 14 days).
Off
This setting stops all irrigation. The controller will still receive
daily ET updates and the schedule will be recalculated.
Display Adjust
This feature lets you adjust the contrast of the display for better
viewing.
Help
Select HELP to see the toll-free phone number to call for
information about your WeatherTRAK ET plus controller. The
HELP feature also displays important activation and
troubleshooting information about your controller.
Alerts
This setting provides a list of alerts that you will receive about
your controller. You will be alerted if you attempt to make a
setting that could harm your plants, and in the event of an
electrical or communication malfunction.
Getting to Know Your WeatherTRAK ET plus8
To Next Page
Loading...