Getting to Know Your WeatherTRAK ET plus 7
2. Upper Line Knob
Turn this knob left or right to select items on a list that appear on
the upper line of the display.
3. Lower Line Knob
Turn this knob left or right to change the items on the list that
you have selected. These will appear in the second line of the display.
4. Copy
Use this button to copy information that has been set for one
station to another station.
5. Function Selector Positions
Run
Set the controller to this position for day-to-day operation. You
will see a display that shows:
• the time and date,
• which valves are on (manually or automatic) and
• whether the controller is in RAIN PAUSE or if the rain
sensor is active
Setup
This position lets you adjust the time, date and time zone.
Schedule
Use this position to set the days your irrigation system can
operate.
Program
This position lets you customize your landscape-specific
parameters by setting various “user modes.” These user modes
include items such as:
• Fully Automated,
• User Program with ET,
• User Program No ET and
• Off.
Copy
This feature allows you to:
• Copy one station’s settings to another station,
• Copy one station’s settings to all other stations or
• Restore default values.
To Next Page
Loading...