2. Turn the Upper Line knob to the left or right to scroll through
items on the list.
For example, if you choose SETUP with the Function Selector,
you can turn the Upper Line knob left or right to scroll through
the entire list of setup features.
Note: As you scroll through a list, many lists will loop through
the last item to the first item. This avoids the need to retrace your
previous steps to go to items in the current list.
3. Turn the Lower Line knob to the left or right to change the items
on the list that you have selected. For example, if you select “Set
Clock” on the upper line with the Upper Line knob, you actually
change the clock settings on the lower line with the Lower Line
knob.
These changes appear in the second lower line of the display.
Note: The latest setting is automatically saved. There is no need
to press any special “save” key.
Getting to Know Your WeatherTRAK ET plus10
To Next Page
Loading...