Copy Setup Defaults
1. Turn the Function Selector knob to COPY.
You will see the following display:
2. Turn the Upper Line knob past all of the “COPY FROM STA 01,
02, 03...” displays through to the last station on your controller,
and past “COPY PROGRAM DEFAULTS” and past “COPY
SCHEDULE DEFAULTS.” The next display is:
The lower line of the display shows the only setting for this
feature.
3. Press the Copy button to complete the process. The display will
change briefly to this:
Then the display will change to this:
The SETUP defaults are now restored.
To Next Page
Loading...