Water Window Status Alert
This alert shows the total amount of used window (runtime plus idle
soak time) and shows the amount that this exceeds the Set window. If
the runtime is under the window allotment, then there is not a
warning, but this screen still shows the time and amount it is under.
In this example, the allowed water window is 300 minutes. The +60
indicates that the calculated schedule is 60 minutes more than the
window is scheduled to complete.
Water Day Status Alert (A)
This alert shows for Schedule A if the user defined scheduled days
are fewer than the days that the Scheduling Engine determines are
required. The alert shown here is for the month of July.
This alert also shows the actual day interval that WeatherTRAK ET
plus Scheduling Engine suggests. This is done by using the maximum
ET value for each time of year. If there is a violation for multiple
months it will show the earliest month first until the schedule for that
month is corrected. If there are multiple months in violation, then the
next month will only show up when the first month has been
resolved.
To Next Page
Loading...