HydroPoint collects, analyzes and validates weather data
gathered from thousands of weather stations. HydroPoint
utilizes these weather stations to provide input parameters for
our local evapotranspiration (ET)* calculations.
ET Everywhere service provides accurate ET down to one square
kilometer, automatically adjusting the water flow with changes in
your local weather conditions. ET Everywhere service is centrally
managed at the HydroPoint Data Center.
3. HydroPoint Customer Service. HydroPoint offers the irrigation
industry’s most professional and personalized customer support.
HydroPoint is here to answer any questions you have: from
understanding how to install WeatherTRAK ET plus to questions
about horticulture, water conservation and proper plant
maintenance.
If you need help, just call HydroPoint Data Systems at (800) 362-8774 or
look HydroPoint Data Systems up on the Web at www.hydropoint.com.
Go to the support page.
How Do I Maintain My Landscape?
Although WeatherTRAK ET plus eliminates most adjustments, it relies
on a good irrigation system.
Inspect your irrigation system by checking for leaks and broken
sprinkler heads at least four times per irrigation season.
What You Can Expect
Once your WeatherTRAK ET plus controller is installed, it will likely
need to be “tuned” as your landscape gets reconditioned. It will take
time and a phased-in approach to develop an optimal water schedule.
However, with WeatherTRAK ET plus, you will begin to see dramatic
results in water savings and plant health within a few short weeks.
* ET is a scientific formula that determines the amount of water lost from
a plant and its soil due to transpiration and evaporation caused by local
weather conditions.
Introduction 3
To Next Page
Loading...