Operation
50 811390 Operator Manual DynaMAX550P/560P/575P Waterjet Pump
During normal operation, the intensifier strokes smoothly to the left and to the right at the same
speed. The stroke-rate bars show the speed of the piston moving to each side of the intensifier.
Refer to Overstroke on page 159 for troubleshooting information.
Intensifier control
When intensifier control is off, the primary screen shows a red × on the intensifier symbol.
Refer to Intensifier control on page 50 for information about adjusting the intensifier
overstroke percentage.
To Next Page
Loading...
Need help?
General
