Hypertherm Powermax 65 Service Manual

Parts
7-20 powermax 65/85 Service Manual
Accessory parts
Part number Description
024548 Leather torch sheathing, brown leather, 7.6m(25 ft)
024877 Leather torch sheathing, black leather with logos, 7.6m(25 ft)
127102 Basic plasma (circles and lines) cutting guide
027668 Deluxe plasma (circles and lines) cutting guide
127301 Powermax65 and Powermax85 dust cover
128647 Kit: Eliminizer air filter
228570 Kit: Eliminizer air filter with protective metal cover
228624 Kit: Eliminizer filter protective metal cover
223125 Kit: 65 A Work lead with hand clamp, 7.6m (25 ft)
223126 Kit: 65 A Work lead with hand clamp, 15m (50 ft)
223127 Kit: 65 A Work lead with hand clamp, 23m (75 ft)
223194 Kit: 65 A Work lead with C-style clamp, 7.6m (25 ft)
223195 Kit: 65 A Work lead with C-style clamp, 15m (50 ft)
223196 Kit: 65 A Work lead with C-style clamp, 23m (75 ft)
223200 Kit: 65 A Work lead with ring terminal, 7.6m (25 ft)
223201 Kit: 65 A Work lead with ring terminal, 15m (50 ft)
223202 Kit: 65 A Work lead with ring terminal, 23m (75 ft)
223035 Kit: 85 A Work lead with hand clamp, 7.6m (25 ft)
223034 Kit: 85 A Work lead with hand clamp, 15m (50 ft)
223033 Kit: 85 A Work lead with hand clamp, 23m (75 ft)
223203 Kit: 85 A Work lead with C-style clamp, 7.6m (25 ft)
223204 Kit: 85 A Work lead with C-style clamp, 15m (50 ft)
223205 Kit: 85 A Work lead with C-style clamp, 23m (75 ft)
223209 Kit: 85 A Work lead with ring terminal, 7.6m (25 ft)
223210 Kit: 85 A Work lead with ring terminal, 15m (50 ft)
223211 Kit: 85 A Work lead with ring terminal, 23m (75 ft)
229370 Kit: Powermax65 and Powermax85 Wheel kit assembly

Hypertherm Powermax 65 Specifications

General

Open Circuit Voltage (OCV)	300 VDC
Gas Supply	Clean, dry, oil-free air or nitrogen
Maximum Cut Capacity (Mild Steel)	1" (25 mm)
Input Voltage	200-600 V, 1/3-PH, 50/60 Hz
Output Current	20 – 65 A
Duty Cycle	50% @ 65 A
Recommended Gas Inlet Flow Rate/Pressure	6.7 scfm @ 85 psi
Torch Lead Length	25 ft (7.6 m)
Maximum Cut Capacity (Aluminum)	5/8" (16 mm)
Severance Cut Capacity (Mild Steel)	1-1/4" (32 mm)
Maximum Severance Thickness	1-1/4 in (32 mm)
Gas Type	Air/Nitrogen
Torch Options	Hand Torch, Mechanized Torch