Hypertherm Powermax 65 Service Manual

Parts
7-26 powermax 65/85 Service Manual
Part number Description
228737 Kit: Powermax65/85/105 180° full-length machine torch/MRT positioning sleeve
228738 Kit: Powermax65/85/105 180° full-length machine torch/MRT removable gear rack replacement
228735 Kit: Powermax65/85/105 180° full-length/mini machine torch/MRT front mounting sleeve
228736 Kit: Powermax65/85/105 180° full-length/mini machine torch/MRT adapter ring (coupler)
228720 Kit: Duramax/MRT 180° machine and robotic torch cap-sensor switch replacement
228731 Kit: Powermax65/85/105 180° full-length/mini machine torch lead replacement,
7.6m(25ft)
228732 Kit: Powermax65/85/105 180° full-length/mini machine torch lead replacement,
10.7m(35ft)
228733 Kit: Powermax65/85/105 180° full-length/mini machine torch lead replacement,
15m(50ft)

Hypertherm Powermax 65 Specifications

General

Open Circuit Voltage (OCV)	300 VDC
Gas Supply	Clean, dry, oil-free air or nitrogen
Maximum Cut Capacity (Mild Steel)	1" (25 mm)
Input Voltage	200-600 V, 1/3-PH, 50/60 Hz
Output Current	20 – 65 A
Duty Cycle	50% @ 65 A
Recommended Gas Inlet Flow Rate/Pressure	6.7 scfm @ 85 psi
Torch Lead Length	25 ft (7.6 m)
Maximum Cut Capacity (Aluminum)	5/8" (16 mm)
Severance Cut Capacity (Mild Steel)	1-1/4" (32 mm)
Maximum Severance Thickness	1-1/4 in (32 mm)
Gas Type	Air/Nitrogen
Torch Options	Hand Torch, Mechanized Torch