A
．
INSTALLATION MANUAL
FOR ELECTRICAL PARTS
Appendix A. VCON Board Manual
IMPORTANT! READ SAFETY INFORMATION before using a VCON Board.
• Install the circuit-braker for effective power disconnection when the board is
operated for the first time
• Check the location of the circuit-braker
• Remove the parts that may cause danger during the work.
• Refer to “VCON Board Manual” carefully because VCON board may be
operated in an unpredicted method during the operation. It may cause danger
due to wrong voltage or wrong connection and it may cause danger.
• Voltage adjustment work must be performed by the qualified personnel.
• Make sure to check the connections before the test.
To Next Page
Loading...