IAI PCON-CA Series User Manual

Chapter 4 Field Network
POWER CON
PCON-CB/LC
157
Chapter 4 Field Network
Applicable for the fieldbus shown in the list below.
Except for RS485 (Modbus), it is the option which can be selected when purchasing. It cannot be
changed after the product is delivered.
Also, for the fieldbus other than RS485, PIO cannot be equipped. And Pulse Train Mode cannot
be operated.
[1] PCON-CB/CFB Type
Fieldbus Name Description Details
DeviceNet Refer to the other ME0256
(Note1)
CC-Link Refer to the other ME0254
(Note1)
PROFIBUS-DP Refer to the other ME0258
(Note1)
CompoNet Refer to the other ME0220
(Note1)
MECHATROLINK-Ⅰ/Ⅱ
Refer to the other ME0221
(Note1)
MECHATROLINK-Ⅲ
Refer to the other ME0317
(Note1)
EtherCAT Refer to the other ME0273
(Note1)
EtherNet/IP Refer to the other ME0278
(Note1)
PROFINET-IO
Control of the actuator is available
with I/O communication using the
control signals same as those for PIO
or the numerical data communication.
Refer to the other ME0333
(Note1)
RS485 Actuator is controlled with using a
general protocol “Modbus”
communication.
Refer to the other ME0162
(Note1)
Note 1 PCON-CB/CFB are the slave units (slave stations). Check the instruction manual of the
master unit of each supplier and PLC to be mounted for the details of each network.
For the instruction of the fieldbus for PCON-CB/CFB, the instruction manual is provided
separately. Use the manual together with this manual.

IAI PCON-CA Series Specifications

General

Brand	IAI
Model	PCON-CA Series
Category	Controller
Language	English