IAI RCON Series - Page 103

Quick Start Guide ~ RCON PROFINET IO Specification ~
p103
©2023 / IAI Corporation
STEP
３
STEP
１
STEP
２
Operation
Table
of
Contents
Home
(Coordinate: 0mm)
Moves to stroke
end side
Stroke end
Home
(Coordinate: 0mm)
Moves to
home side
Stroke end
(1)
(2)
(3)
“Position data edit” window
●While Forward is clicked, a movement
should be made towards the stroke end.
●While Backward is clicked, a movement
should be made towards the home.
As shown in the figure below, there are three levels of jog velocity available
for change.
(1)
Clicking [FWD] will move the actuator to the stroke end side.
(2)
Clicking [BWD] will move the actuator to the home direction.
(3)
(1)
Select
(3)
Click
4
Actuator Move in Jog Operation
Actuator starts moving!
Actuator starts moving!
(2)
Click