Quick Start Guide ~ RCON PROFINET IO Specification ~
p106
©2023 / IAI Corporation
STEP
３
STEP
１
STEP
２
Operation
Table
of
Contents
When a window for “information” is shown, click [OK] .
(6)
“Information” window
(6)
Click
Once the transfer of the position data is completed,
the input values should turn from “black bold letters” into black letters.
(7)
Click and select the position No. “Position” column to be moved.
(1)
(1)
Select
6
Move to registered position (target position)
To Next Page
Loading...
