IAI RCON Series - Page 113

Quick Start Guide ~ RCON PROFINET IO Specification ~
p113
©2023 / IAI Corporation
STEP
３
STEP
１
STEP
２
Operation
Table
of
Contents
Select “Horizontal mount”.
(3)
With the set conditions, the “Optimum velocity” and “Optimum accel/decel”
that gives the fastest cycle time should be displayed.
“Payload setting” window
(3)
Select
In this example,
“Horizontal mount”
is selected.
Set the “Payload” for the “Forward motion” and “Backward motion”.
(4)
“Payload setting” window
Click [OK] . Data starts to be transferred.
(5)
(5)
Click
“Payload setting” window
In the example, input:
Forward motion: 10kg
Backward motion: 4kg
(4)
Input each
value +
“Enter”
(4)
Input each
value +
“Enter”
“Information” window
Once the transfer completes, the following “Information” window should
come up. Click [OK] .
(6)
(6)
Click