IAI RCON Series - Page 115

Quick Start Guide ~ RCON PROFINET IO Specification ~
p115
©2023 / IAI Corporation
STEP
３
STEP
１
STEP
２
Operation
Table
of
Contents
3
Setup / Tuning Input for Stop Position
Click the cell for the backward end (home side) and input a position to set
(and press the “Enter” key after input).
(1)
“Simple data setting” window
“Simple data setting” window
(2)
Input
+
“Enter”
(1)
Input
+
“Enter”
Click the cell for the forward end and input a position to set (and press the
“Enter” key after input).
(2)
In the example, input:
Backward end
(Home Side) : 10.00
In the example, input:
Forward : 40.00