Quick Start Guide ~ RCON PROFINET IO Specification ~
p78
©2023 / IAI Corporation
STEP
３
STEP
１
STEP
２
Initial Setting
Table
of
Contents
6
Checking I/O Module Assignment
Check the assignment of the I/O module. Clip the PROFINET port of the iai-prt.
Click .
“Device Overview (I/O Module Assignment)” of the iai-prt should be displayed.
Confirm that the 4-word module is set for the necessary quantity.
* For the online connection, the I/O module should automatically be assigned
following the content of the set controller.
“TIA Portal main” window
“TIA Portal main” window
“TIA Portal main” window
(1)
Click
(2)
Click
Occupancy Information
IN 4 word module : 1
OUT 4 word module : 1
REC system
Input 4 word × 1
Output 4 word × 1
(1)
(2)
(3)
To Next Page
Loading...
