Table 6. Service Processor Error Codes. (continued)
Error Code Description Action/ Possible Failing FRU
4B00F00F Call home fault 1. Check modem power, modem
connections, and modem
configuration. Modem configuration
can be checked using the service
processor menus.
2. Telephone line problem
3. Remote system problem
4. Modem
5. Service processor card.
Location: U0.1-P1-X1
6. I/O planar in primary drawer.
Location: U0.1-P1
4B00F010 Service processor logged a fault Review error logs, beginning with
service processor, then AIX.
4B00F011 System cannot find boot record Check boot device selections using
SMS utilities. If unable to find the boot
device, go to “MAP 1540: Minimum
Configuration” on page 117.
4B00F100 Service processor database fault This message appears only in service
processor error log. If it persists, re-IPL
to clear logs and reset programs.
4B00F101 FLASH update CRC fault This message appears only in service
processor error log. If it persists, re-IPL
to clear logs and reset programs.
4B00F102 Memory allocation fault This message appears only in service
processor error log. If it persists, re-IPL
to clear logs and reset programs.
4B00F103 Service processor initialization fault This message appears only in service
processor error log. If it persists, re-IPL
to clear logs and reset programs.
4B00F104 System mode switch fault System rack fault; go to “Entry MAP” on
page 79.
Location: U1
4B00F105 FLASH update fault This message appears only in service
processor error log. If it persists, re-IPL
to clear logs and reset programs. Other
contributors to this condition include:
1. Bad update image.
2. Service processor card.
Location: U0.1-P1-X1
4B00F106 FLASH update LID replacement fault This message appears only in service
processor error log. If it persists, re-IPL
to clear logs and reset programs. Other
contributors to this condition include:
1. Bad update image.
2. Service processor card.
Location: U0.1-P1-X1
Chapter 5. Error Code to FRU Index
177
To Next Page
Loading...
