IBM S85 pSeries 680 User Manual

Table 6. Service Processor Error Codes. (continued)
Error Code Description Action/ Possible Failing FRU
4B00F10D PRD buffer in NVRAM full This message appears only in service
processor error log. If it persists, re-IPL
to clear logs and reset programs. If the
problem continues, call the support
center for assistance.
4B00F10E NVRAM access failure This message appears only in service
processor error log. If it persists, re-IPL
to clear logs and reset programs.
Additional contributors to this condition
include:
1. Service processor card.
Location: U0.1-P1-X1
2. If the problem continues, call the
support center for assistance.
4B00F10F Modem not detected 1. Check modem power, modem
connections, and modem
configuration. Modem configuration
can be checked using the service
processor menus.
2. Service processor card.
Location: U0.1-P1-X1
4B00F110 Call to service center failed 1. Check modem connection and
modem configuration. Modem
configuration can be checked using
the service processor menus.
2. Remote system problem
3. Telephone line problem
4. Remote host problem
5. Modem
6. Service processor card.
Location: U0.1-P1-X1
4B00F111 Call to System Administrator failed 1. Check modem connection and
modem configuration. Modem
configuration can be checked using
the service processor menus.
2. Remote system problem
3. Telephone line problem
4. Remote host problem
5. Modem.
6. Service processor card.
Location: U0.1-P1-X1
Chapter 5. Error Code to FRU Index
179

IBM S85 pSeries 680 Specifications

General

Brand	IBM
Model	S85 pSeries 680
Category	Server
Language	English