EasyManuals Logo
Home>IBM>Server>System x3550 M3 Type 4254

IBM System x3550 M3 Type 4254 Problem Determination And Service Guide

IBM System x3550 M3 Type 4254
318 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 4, “Parts listing, System x3550 M3 Types 4254 and 7944,” on page 159 to determine which
components are customer replaceable units (CRU) and which components are field replaceable units
(FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
v Go to the IBM support Web site at http://www.ibm.com/systems/support/ to check for technical
information, hints, tips, and new device drivers or to submit a request for information.
Error code Description Action
0010002 Microprocessor not supported.
1. Reseat the following components one at a time, in
the order shown, restarting the server each time.
a. (Trained service technician only)
Microprocessor 1.
b. (Trained service technician only)
Microprocessor 2 (if installed.)
2. (Trained service technician only) Remove
microprocessor 2 and restart the server.
3. (Trained service technician only) Remove
microprocessor 1 and install microprocessor 2 in
the microprocessor 1 connector. Restart the
server. If the error is corrected, then
microprocessor 1 is bad and must be replaced.
4. Replace the following components one at a time,
in the order shown, restarting the server each
time.
a. (Trained service technician only)
Microprocessor 1.
b. (Trained service technician only)
Microprocessor 2.
c. (Trained service technician only) System
board.
0011000 Invalid microprocessor type.
1. Update the server firmware to the latest level (see
“Updating the firmware” on page 255).
2. (Trained service technician only) Remove and
replace the affected microprocessor (error LED is
lit) with a supported type (see “Installing a
microprocessor and heat sink” on page 245).
0011002 Microprocessor mismatch.
1. Run the Setup utility and select System
Information System Summary Processor
Details to view the microprocessor information to
compare the installed microprocessor
specifications.
2. (Trained service technician only) Remove and
replace one of the microprocessors so that they
both match.
28 IBM System x3550 M3 Types 4254 and 7944: Problem Determination and Service Guide

Table of Contents

Other manuals for IBM System x3550 M3 Type 4254

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM System x3550 M3 Type 4254 and is the answer not in the manual?

IBM System x3550 M3 Type 4254 Specifications

General IconGeneral
BrandIBM
ModelSystem x3550 M3 Type 4254
CategoryServer
LanguageEnglish

Related product manuals