Ice PegasusHS User Manual

3-33
Default Options Configuration
Rev AA
User Interfaces
Passwords
Level 2: Mask None None None Check which functions are to be available to Level
2 users
Level 2: Name None None None The name of a level 2 user e.g. Supervisor Level 2: Password
None None None The password for level 2 (numeric only)
Level 3: Mask None None None Check which functions are to be available to Level
3 users
Level 3: Name None None None The name of a level 3 user e.g. Technician Level 3: Password
None None None The password for level 3 (numeric only)
Prompt On CLARiTY Update Detect
None None Yes When a USB memory stick is inserted and USB is
enabled, CLARiTY automatically runs the CLARiTY update if there is a valid file on the stick. When the USB is disabled, the user has to manually initiate the action from the CLARiTY screen
Re calibrate Touchscreen
Re calibrate Touchscreen
None None Triggers re calibration of the touchscreen
User Interfaces
Set Screen Contrast To Default
None None Not used on the Videojet 6210 Coder
CLARiTY Config
Archive None None Flags whether this setup has ever been archived
(auto set)
Last Updated None None Flags when the setup was last changed (auto set)
Section Sub-Section Parameter
Name
CLARiTY Name
Units Default Functionality
Table 3-1: Videojet 6210 Printer Configuration Manager (Continued)
ICE Pegasus Service Manual

Ice PegasusHS Specifications

General

Brand	Ice
Model	PegasusHS
Category	Printer
Language	English