5-12
Maintaining the Printer
Rev AA
2 The Compact Flash card is located on the side with the mounting plate
(the opposite side to the printhead). Using a pair of long nosed pliers,
gently grip the Compact Flash Card and pull to extract (Figure 5-13).
3 Take the new card, orientate such that the face with the Windows
License sticker is facing away from the PCB and gently but firmly
push home.
4 Replace the rear cover.
Replacing the Main PCB
To replace the main PCB, proceed as follows:
1 Before removing the rear cover, place the printer on a flat surface
cassette side up and remove the cassette if this hasn't already been
removed.
Windows License Sticker
Figure 5-13: Compact Flash Card Removal
I
CE Pegasus Service Manual
To Next Page
Loading...