4-26
Working with Passwords
Rev AA
•Set-up
• Diagnostics
• Databases
This is can be easily explained by means of an example (Table 4-1):
In this example, registration is not selected for any of the three user access
levels, therefore available to all the users to use without any password
protection.
If there is at least one X in a column, then that function is only available to
a user level against which a X appears. Example: Set-up column in the
Table 4-1 is accessible (via a password) only to Level 2 and Level 3
personnel.
Each user level has a different numeric password that can be between 4
and 10 digits.
Password Protection Set-up
Set-up of password protection for CLARiTY is done using the CLARiTY
Configuration Manager.
Run CLARiTY Configuration Manager on the PC and upload the printer
parameters.
Job Registration Set-up Diagnostics Databases
Level 1
(Operator)
X
Level 2
(Line Super-
visor)
XXXX
Level 3
(Mainte-
nance)
XX X
Table 4-1: Password Protection - Example
I
CE Pegasus Service Manual
To Next Page
Loading...