4-8
Using the Tools Page
Rev AA
Working with the Options Setup Page
There are no options available at this time, it may be introduced in the
next versions of the CLARiTY.
Working with Diagnostics
Touch diagnostics button on the tools page to access the diagnostics page
(Figure 4-8).
The diagnostics page allows you to access the following pages:
• Printhead and printing operations diagnostics
• Consumables (ribbon) diagnostics
• General control (e.g. software versions, communications port
status)
diag
nostics
• O
ptions
Figure 4-8: Diagnostics Page
ICE Pegasus Service Manual