This receiver has an Eco Low Power Saving function (under 1w in Standby). When this is
turned ON the RF loop out will not be active and will not pass a TV signal when the unit is in
Standby. If you require the RF loop out to be active and pass a TV signal while in Standby
mode please keep the Eco Low Power Save function set to OFF.
Sets antenna power supply ON or OFF.
Switch this to ON if you are using an antenna amplifier which
requires power from the receiver. (5V and 0V respectively) .
Setting your local country will select the correct TV UHF
channel list. So please ensure you have set your receiver
to your local country.
From time to time ICECRYPT will provide software updates
in order to improve the performance and specifications
of your unit. When available, the unit is designed to
accept the update via the USB port via a USB memory stick.
In this menu you can view the system information of your
receiver such as Model name, Software version, System ID
and the software release date.
System Information
Software Upgrade (USB)
Country
Antenna Power
ECO Power Save
Option Menu
24
To Next Page
Loading...