17
2. ADVANCED OPERATIONS
Operating RTTY (FSK)
The IC-7610 has a built-in RTTY decoder and
encoder. Using a USB keyboard and the contents
set in the RTTY TX memory, you can do basic RTTY
operations without using an external device or
software.
L If you are using PSK software, refer to the software manual.
RTTY DECODE screen <MENU1>
RTTY DECODE screen <MENU2>
Key Action
<MENU1>
<MENU2>
Selects the Function menus.
HOLD/
CLR
Touch
Turns the Hold function ON or OFF.
• “
” is displayed, and the
RTTY DECODE screen stops.
Touch
1 sec.
Clears the displayed characters.
• While the Hold function is ON,
this clears the characters and
cancels the Hold function.
TX MEM
Opens the RTTY MEMORY screen.
ADJ
Opens the THRESHOLD screen.
You can adjust the threshold level.
• Checking the RTTY DECODE, rotate
to adjust the threshold level to
where the characters are not displayed
by noise.
DEF
Touch
1 sec.
Resets the Threshold level to the
default.
L The [DEF] key is displayed
when after touching [ADJ].
MAIN/SUB
Changes between the Main or Sub band
RTTY DECODE screen.
EXPAND Selects the Expanded or Normal screen.
LOG
Displays the RTTY DECODE LOG screen.
•
type or the time stamp.
LOG
VIEW
Displays the RTTY DECODE LOG VIEW
screen.
•
SET
Displays the RTTY DECODE SET
screen.
To Next Page
Loading...
Need help?
General
