95
8
DV MODE OPERATION
N2ECEIVEDCALLSIGNS
When a call is received in the DV mode, the calling sta-
tion and repeater call signs being used can be stored
in the received call record. The stored call signs can
be displayed in the following manner.
Up to 20 calls can be stored.
D$ESIREDCALLRECORDDISPLAY
q Push [DVsDR] to select the DV mode.
w Push [MENU] one or more times to display the “M3”
screen (Menu 3).
s)NTHE$2MODEPUSH;-%.5=ONCEORTWICETOSELECT
the “D1” screen.
e Push [CD](F-2) to display the “CD” screen (Call Re-
cord).
r Rotate [MAIN DIAL] to select the desired record
channel (RX01 to RX20).
s(OLDDOWN;#,2=&FORSECONDTOCLEARTHESELECTED
record channel.
t Push [Z](F-1) one or more times to display the call
record.
s#!,,%2 4HECALLINGSTATIONSCALLSIGN
s !FOURCHARACTERNOTEFROMTHESTATION
that made the call.
s#!,,%$ 4HECALLSIGNOFTHESTATIONTHATWAS
called, or “CQCQCQ.”
s28204 4HECALLSIGNOFTHEREPEATERTHECALL-
ing station accessed, or the call sign
of the gateway repeater the calling
station used.
s28204 4HE CALL SIGN OF THE REPEATER YOU
heard the call on.
s-3' !NYRECEIVEDMESSAGEISDISPLAYED
After the MSG screen, the date and time infor-
mation are displayed. If the received date and
time are unknown, the elapsed time after the call
was received is displayed (e.g. “(–12:34)”). If the
power is turned OFF, then ON, or 48 hours have
passed, “– – – – /– – /– – – –:– –” is displayed.
y Push [Z](F-1) one or more times to return to the
“CD” screen.
To Next Page
Loading...
