100
8
DV MODE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
s!CCESSREPEATERSCAN’STARGETSETTING
9OUCANSELECTTHEDESIREDREPEATERSASASCANTARGET,
for faster selection and scanning.
Non-selected repeaters are skipped during scanning.
s When a repeater is specified as a non-scan target, its
“R1USE” setting is automatically set to NO. In this case,
the repeater cannot be selected as the access repeater.
(p. 90)
q In the DR mode,
p
ush [MENU] one or more times to
display the “D2” screen.
w Rotate [MAIN DIAL] to select the desired access
repeater.
s&IRST SELECTING THE REPEATERCALL SIGNGROUP MAKES IT
more convenient, if you have programmed repeaters
into Groups. See the description in page 93 for details
of the repeater call sign group selection.
e Hold down [SEL](F-2) for 1 second to set the select
setting to ON.
sh3%,vAPPEARS
r Push [SEL](F-2) to set the select setting to OFF.
sh3%,vDISAPPEARS
t Push [MENU] to return to the “D2” screen.
D!CCESSREPEATERSCAN
The Access repeater scan is useful to find a repeater.
For rapidly find, the Access repeater scan skips the
repeaters which are not specified as a scan target.
9OUCANSELECTTHEDESIREDREPEATERSASASCANTARGET
See page 90 or ‘Access repeater scan’s target setting’
as described below.
q Hold down [DVsDR] for 1 second to select the DR
mode.
s4HE$6MODEISAUTOMATICALLYSELECTED
sThe access repeater selection screen is displayed.
- Only the repeaters, specified as a scan target are dis-
played.
w
P
ush [MENU] one or more time to display the “D2”
screen.
e Push [SCAN](F-1) to start the Access repeater
scan.
s4HE-(ZANDK(ZDECIMALPOINTSANDh ” blink while
scanning.
s(OLDDOWN;3#!.=&FORSECONDTOENTERTHE3CAN
set mode. Push [MENU] to exit the Scan set mode.
- If
“Up/Down” is selected as
the “MAIN DIAL (SCAN)”
option
in the Scan Set mode, rotating [MAIN DIAL]
changes the scanning direction. (p. 147)
s4HESCANPAUSESWHENASIGNALISRECEIVED
r Push [SCAN](F-1) to cancel the scan.
To Next Page
Loading...
