Icom IC-9100 - Scan Set Mode; Scan Speed; Scan Resume; Main Dial (Scan)

147
11
SCANS
N3CANSETMODE
The scan speed, Scan Resume function and [MAIN
DIAL] scan function can be set in the Scan Set mode.
q P ush [MENU] one or more times to display the “M2”
screen (Menu 2).
w Push [SCAN](F-1) to display the “SCAN” screen.
e Push [SET](F-5) to enter the Scan Set mode.
r Push [Y](F-1) or [Z](F-2) to select the desired
item.
t Rotate [MAIN DIAL] to select the desired option.
s(OLD DOWN;&=FOR SECOND TO RESETTOTHEDEFAULT
value.
y Push [MENU] to save, and return to the “SCAN”
screen.
u Push [MENU] again to return to the “M2” screen
(Menu 2).
[SET] [SCAN]/[]
[MENU] [F-3] [MAIN DIAL]
[]
SCAN MEM SWR TCON VSC
M2
PRO
 F
SPAN SETFIN
SCAN
PROG:P1  F :  10k
Ú
SCAN Speed
Ù 1 HIGH
SET
Ú
SCAN Resume
Ù 2ON
SET
Ú
MAIN DIAL (SCAN)
Ù 3 Up/Down
SET
3#!.3PEED1. $EFAULT()'(
Select the desired scan speed between high and low.
s()'( 4HESCANISFASTER
s,/7 : The scan is slower.
SCAN Resume 2. $EFAULT/.
Set the Scan Resume function ON or OFF.
s/. 7HENASIGNALISDETECTEDTHESCANPAUSESFOR
10 seconds, then resumes. When a signal dis-
appears, the scan resumes 2 seconds later.
s/&&7HENA SIGNAL ISDETECTEDTHESCANISCAN-
celled.
-!).$)!,3#!.3. $EFAULT5P$OWN
Select how the [MAIN DIAL] functions, during a scan.
s/&& 2OTATING;-!).$)!,=CANCELSTHESCAN
s5P$OWN 2OTATING;-!).$)!,=CHANGESTHESCAN-
ning direction.
Push
Push
Push
Push