Icom IC-9100 - Specifications

19
197
SPECIFICATIONS
N'ENERAL
s&REQUENCYCOVERAGE  UNIT-(Z
Receive
0.030–60.000*
1
*
2
136.000–174.000*
1
*
2
420.000–480.000*
1
*
2
1240.000–1320.000
†
Transmit
1.800–1.999*
2
, 3.500–3.999*
2
,
5.33050*
3
, 5.34650*
3
, 5.36650*
3
,
5.37150*
3
, 5.40350*
3
,
7.000–7.300*
2
, 10.100–10.150*
2
,
14.000–14.350*
2
, 18.068–18.168*
2
,
21.000–21.450*
2
, 24.890–24.990*
2
,
28.000–29.700*
2
, 50.000–54.000*
2
144.000–148.000*
2
, 430.000–450.000*
2
1240.000–1300.000
†
*
1
Some frequency bands are not guaranteed.
*
2
Depending on version. *
3
USA version only.
s-ODE  53",3"#72449!-&-
DV*
*The optional UT-121 is required.
s.OOFMEMORYCHANNELS  #((99CH × 3 band)
(
396CH with UX-9100
‡
99CH ×
4 bands)
s.OOFSCANEDGE
memory channels : 18CH
(6 × 3 band)
( 24CH with UX-9100
‡
6CH × 4
bands
)
s.OOFCALLCHANNELS  #(
(1 × 3 band)
( 4CH with UX-9100
‡
1CH × 4
bands
)
s.OOF3ATELLITE
memory channels : 20CH
s!NTENNACONNECTOR 3/× 3
Type-N × 2
sAntenna impedance :
50 ø (at Antenna Tuner OFF)
s Usable temperature range : 0˚C to +50˚C (+32˚F to +122˚F)
s&REQUENCYSTABILITY  ,ESSTHANÒPPMMINAFTER
power ON.
#TO#&TO
+122˚F)
s&REQUENCYRESOLUTION  (Z
s0OWERSUPPLY 
6$#Ò(negative ground)
s0OWERCONSUMPTION
Transmit
Max. power : 24.0 A
(HF/50/144/430 MHz band)
9.0 A
(1200 MHz band)
†
Receive
Standby : 3.0 A
(HF/50/144/430 MHz band)
4.0 A
(1200 MHz band)
†
Max. audio : 4.5 A (HF/50/144/430 MHz band)
5.5 A
(1200 MHz band)
†
s$IMENSIONS  315(W) × 116(H) × 343(D) mm
(projections not included) 12.4(W) × 4.57(H) × 13.5(D) in
s7EIGHTAPPROXIMATELY KGLB
KGLB
(with UX-9100)
s!##CONNECTOR  PIN
s#)6CONNECTOR CONDUCTORDMM
1
⁄8″)
N4RANSMITTER
s/UTPUTPOWER(continuously adjustable)
&REQUENCYBAND /UTPUTPOWER
HF/50 MHz 2 to 100 W (AM: 2 to 30 W)*
144 MHz 2 to 100 W
430 MHz 2 to 75 W
1200 MHz
†
1 to 10 W
(at 13.8 V DC/+25˚C)
* In the AM mode, transmission can be performed only on
the HF/50 MHz frequency band.
s-ODULATIONSYSTEM
SSB : Digital PSN modulation
AM : Digital Low power modulation
FM : Digital Phase modulation
DV* :
GMSK Digital Phase modulation
*The optional UT-121 is required.
s3PURIOUSEMISSION
(Spurious domain)
HF bands : Less than –50 dB
50/144 MHz band : Less than –63 dB
430 MHz band : Less than –61.8 dB
1200 MHz band
†
: Less than –53 dB
(Out-of-band domain)
HF bands : Less than –40 dB
50/144/430 MHz band : Less than –60 dB
1200 MHz band
†
: Less than –50 dB
s#ARRIERSUPPRESSION  -ORETHAND"
s5NWANTEDSIDEBAND
suppression : More than 55 dB
(1200 MHz: More than 40 dB)
†
s∂TX variable range : ±9.999 kHz
s-ICROPHONECONNECTOR PINCONNECTOR
s-ICROPHONEIMPEDANCE ø
s%,%#+%9CONNECTOR 
3-conductor 6.35(d) mm (
1
⁄4″)
s+%9CONNECTOR 
3-conductor 6.35(d) mm (
1
⁄4″)
s3%.$CONNECTOR  0HONOJACK
(RCA)
s!,#CONNECTOR  0HONOJACK(RCA)
†
The optional UX-9100 is required for 1200 MHz frequency band
operation.
‡
Only when the 1200 MHz frequency band is selected.