Icom IC-9100 - Contest Number Set Mode; Number Style; Count up Trigger; Present Number

53
4
RECEIVE AND TRANSMIT
N Electronic keyer functions (Continued)
D#ONTESTNUMBER3ETMODE
This mode is used to set the contest number, count up
trigger and Present number.
s3ETTINGCONTENTS
q In the CW mode, p ush [MENU] to display the “M1”
screen (Menu 1).
w0USH;+%9=&TODISPLAYTHEh+%9vSCREEN-EM-
ory Keyer).
e Push [001](F-4) to enter the Contest Number Set
mode.
r Push [Y](F-1) or [Z](F-2) to select the desired
item.
t Rotate [MAIN DIAL] to select the desired option.
s(OLDDOWN;&=FORSECONDTORESETTOTHEDEFAULTSET-
ting, if desired.
y0USH ;-%.5= TO SAVE AND RETURN TO THE h+%9v
screen (Memory Keyer).
u Push [MENU] to return to the “M1” screen (Menu 1).
.UMBER3TYLE1. $EFAULT.ORMAL
This item sets the numbering system used for contest
numbers— normal or short morse numbers.
Short morse numbers are also referred to as “cut”
numbers.
s.ORMAL $OESNOTUSESHORTMORSENUMBERS
sANO : Sets 1 as A, 9 as N and 0 as O.
sANT : Sets 1 as A, 9 as N and 0 as T.
s NO : Sets 9 as N and 0 as O.
s NT : Sets 9 as N and 0 as T.
#OUNT5P4RIGGER2. $EFAULT-
Set the count-up trigger to one of four memory slots
for the contest number exchange. The count-up trigger
allows the contest number to automatically advance
after each complete number exchange is sent.
s---OR-CANBESET
0RESENT.UMBER3. $EFAULT
This item shows the current number for the count-up
trigger channel set above.
s2OTATE;-!).$)!,=TOCHANGETHENUMBERORHOLD
down [CLR](F-3) for 1 second to reset the current
number to 001.
 1  Normal
001
Number Style
Select the item
Reset to the default
setting