Icom IC-9100 - My Position; Manual Position; Position Format; GPS Set Mode

132
9
GPS/GPS-A OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
N GPS Set mode
The following individual settings are selectable in the
GPS Set mode. Set them to suit your GPS operating
needs.
q Hold down [CALL/GPS] for 1 second to display the
“GPS” screen.
w Push [SET](F-5) to enter the GPS Set mode.
e Push [Y](F-1) or [Z](F-2) to select the desired
item.
r Rotate [MAIN DIAL] to select the desired option.
s(OLDDOWN;&=FORSECONDTORESETTOTHEDEFAULTSET-
ting, if desired.
t Push [MENU] to save, and return to the “GPS”
screen.
'032ECEIVER"AUD1. $EFAULT
Set the baud rate of the GPS receiver to 4800 bps or
9600 bps.
0OSITION&ORMAT2. $EFAULTDDD°mm.mm’
Select either the ddd°mm.mm’ or ddd°mm’ss" format
to display position information.
5NITS3. $EFAULTFEETMILE
Select either meter or feet/mile format to display the
distance and elevation information.
#/-0!33$IRECTION4. $EFAULT.ORTH2%&
Select the compass display type.
When the position data is displayed, push [F-1] to se-
lect the compass type.
s.ORTH2%&4HE TOP OF THE COMPASS REPRESENTS
north.
s3OUTH2%&4HE TOP OF THE COMPASS REPRESENTS
south.
54#/FFSET5. $EFAULTÒ
Set the time difference between UTC (Universal Time
Coordinated) and the local time to between –14:00
and +14:00 in 00:05 steps.
'03)NDICATOR6. $EFAULT/.
Turn the GPS icon (“
”) display function ON or OFF.
s/&&h ” does not appear.
s/. h
” appears on the display when a valid po-
SITIONDATAISRECEIVEDBLINKSWHENANINVALID
data is received.
-90OSITION7. $EFAULT'03
Select either GPS or Manual to enter your current po-
sition.
s'03 4HE'03RECEIVERSPOSITIONDATAISUSED
s-ANUAL-ANUALLY ENTERED POSITION DATA IS USED
However, when the GPS receiver is con-
nected to the transceiver, this setting will
automatically switch to “GPS.”
-ANUAL0OSITION8. $EFAULT,!4 ’N
,/.’%
Manually enter your latitude and longitude data. The
manually programmed data can be memorised.
This item does not appear when “GPS” is selected in
“My Position.”
q Push [EDT](F-4) to enter the position data edit
mode.
w Push [Y](F-1) or [Z](F-2) to select “LAT” or “LON,”
and rotate [MAIN DIAL] to enter the desired posi-
tion data.
s7HENh,!4vISSELECTEDENTERTHELATITUDEDATA
s7HENh,/.vISSELECTEDENTERTHELONGITUDEDATA
s3EEPAGEFORDETAILS
e Hold down [WR](F-5) to write the data.
Select the item
Reset to the default
setting
[]
[MENU] [F-3] [MAIN DIAL]
[] [SET][]
[CALL/GPS]
Ù 1 Ú 4800
SET
GPS Receiver Baud
Displays the Set mode
item name and number
Displays the option