51
4
RECEIVE AND TRANSMIT
N Electronic keyer functions (Continued)
D-EMORYKEYERSENDMENU
Pre-set characters can be sent using the Keyer Send
menu. Contents of the memory keyer are set in the
Edit menu.
s4RANSMITTING
q
In the CW mode, p
ush [MENU] to display the “M1”
screen (Menu 1).
w0USH;+%9=&TODISPLAYTHEh+%9vSCREEN-EM-
ory Keyer).
e Push [SEND](F-2) to display the “SEND” screen
(Keyer Send).
r Push [TRANSMIT] to switch the transceiver to
transmit, or turn ON the Break-in function. (p. 79)
t Push one of the function keys, [M1](F-1) to
[M4](F-4), to send the memory keyer contents.
s(OLDINGDOWNAFUNCTIONKEYFORSECONDREPEATEDLY
SENDSTHECONTENTSPUSHANYFUNCTIONKEYTOCANCELTHE
transmission.
s4HE CONTEST NUMBER COUNTER ADVANCES EACH TIME THE
contents are sent.
s0USH;=&TOREDUCETHECONTESTNUMBERADVANCES
by 1 before sending the memory keyer contents to a
station a second time.
s3ETTHEMEMORYKEYERREPEATINTERVALTOBETWEENAND
60 seconds (1 second steps) in the “Keyer Repeat Time”
item of the Keyer Set mode. (p. 54)
y0USH;-%.5=TORETURNTOTHEh+%9vSCREEN-EM-
ory Keyer).
u
Push [MENU] to return to the “M1” screen (Menu 1).
For your information
When an external keypad is connected to pin 3 and
pin 7 of the [MIC] connector, the contents of M1 to
M4 can be transmitted without selecting the keyer
send menu.
See page 167 for details.
To Next Page
Loading...
