Icom IC-9100 - Operating Mode Selection; Selecting the CW;RTTY Mode;Selecting the AM;FM Mode; Selecting the DV Mode (Including DR Mode); Selecting the SSB Mode

43
3
BASIC OPERATION
N/PERATINGMODESELECTION
The usable operating modes in the IC-9100 are listed
to the right.
9OUCANSELECTTHEDESIREDOPERATINGMODEBYPUSH-
ing the mode switch.
See the diagram to the right for the order of selection.
9OU CAN MUTE THE MICROPHONE SIGNALS WHEN THE
data mode is selected, depending on the “DATA
MOD” option in the Set mode (p. 167).
s3ELECTINGTHE33"MODE
± Push [SSB] to select the USB or LSB mode.
sh,3"vORh53"vAPPEARS
s7HENOPERATINGABOVE-(Z53"ISSELECTEDlRST
when operating below 10 MHz, LSB is selected first.
s0USH;33"=AGAINTOTOGGLEBETWEEN53"AND,3"
s!FTER 53" OR ,3" IS SELECTED HOLD DOWN;33"= FOR
1 second to select the data mode. (“D” appears)
s)NTHEDATAMODEPUSH;33"=TORETURNTOTHENORMAL
SSB mode.
s3ELECTINGTHE#72449MODE
±0USH;#72449=TOSELECTTHE#7OR2449MODE
sh#7vORh2449vAPPEARS
s0USH ;#72449= AGAIN TO TOGGLE BETWEEN #7 AND
2449
s!FTER#7OR2449ISSELECTEDHOLDDOWN;#72449=
for 1 second to toggle between
normal and reverse
modes.
h#72vORh24492vAPPEARS
s3ELECTINGTHE!-&-MODE
± Push [AM/FM] to select the AM or FM mode.
sh!-vORh&-vAPPEARS
s0USH;!-&-=AGAINTOTOGGLEBETWEEN!-AND&-
s!FTER!- OR &- ISSELECTED HOLD DOWN ;!-&-= FOR
1 second to select the data mode. (“D” appears)
s)NTHEDATAMODEPUSH;!-&-=TORETURNTOthe normal
AM or FM mode.
./4%
s)NTHE!-MODEYOUCANTRANSMITONONLYTHE
HF/50MHz frequency bands.
s4HE!-MODECANNOTBESELECTEDONTHE
MHz frequency band.
s3ELECTINGTHE$6MODEINCLUDING$2MODE
±0USH;$6s$2=TOSELECTTHE$6MODE
sh$6vAPPEARS
s$6MODEDIGITALVOICELOWSPEEDDATACOMMUNICA-
tion) allows you to exchange the text message and call
sign, and transmit a position data with a third-party GPS
receiver.
±(OLD DOWN ;$6s$2= TO TURN THE $2 $34!2
®
Repeater) mode operation ON or OFF.
 s“DV” and “ ” appears.
s4HE$6MODEISAUTOMATICALLYSELECTEDWHENTHE$2
mode is ON.
s$2$34!22EPEATERMODEALLOWSYOUTOUSEARE-
peater list to operate a D-STAR repeater simply.
The optional UT-121 is required for DV mode operation.
Mode switches
USBUSB
AMAM
LSB LSB
CW-R CW RTTY RTTY-R
FM FM
DV DR
: Push momentary
: Hold down for 1 second
s5SABLEOPERATINGMODES
-ODESWITCH /PERATINGMODE
;33"=
USB USB Data
LSB LSB Data
[CW/RTTY]
CW CW Reverse
2449 24492EVERSE
[AM/FM]
AM AM Data
FM FM Data
;$6s$2= DV

INFORMATION!
The DV mode can be selected in either MAIN or SUB
band. If you select the DV mode in both Bands, the
transceiver cannot receive on the SUB Band.