Icom IC-9100 - Clear All Memory Channels; Clear a Desired Bank; Clear a Desired Memory Channel; GPS Memory Clearing

131
9
GPS/GPS-A OPERATION
N GPS memory operation (Continued)
D'03MEMORYCLEARING
s#LEARALLMEMORYCHANNELS
q Hold down [CALL/GPS] for 1 second to display the
“GPS” screen.
w Push [GPM](F-2) to display the “GPM” screen (GPS
Memory).
e Rotate [MAIN DIAL] to select “ALL.”
r Hold down [CLR](F-3) for 1 second to clear all
Memory channels.
sh!,,#LEAR/+vAPPEARS
t0USH;9%3=&FORSECONDTOCLEAR
sTo cancel clearing, push [NO](F-5).
y Push [MENU] two times to return to the “GPS”
screen.
s#LEARADESIREDBANK
q Hold down [CALL/GPS] for 1 second to display the
“GPS” screen.
w Push [GPM](F-2) to display the “GPM” screen (GPS
Memory).
e Rotate [MAIN DIAL] to select the desired Memory
bank.
r Hold down [CLR](F-3) for 1 second to clear the se-
lected Memory bank.
sh"!.+#LEAR/+vAPPEARS
t0USH;9%3=&FORSECONDTOCLEAR
sTo cancel clearing, push [NO](F-5).
y Push [MENU] two times to return to the “GPS”
screen.
s#LEARADESIREDMEMORYCHANNEL
q Hold down [CALL/GPS] for 1 second to display the
“GPS” screen.
w Push [GPM](F-2) to display the “GPM” screen (GPS
Memory).
e Rotate [MAIN DIAL] to select “ALL” or a Memory
bank, then push [LIST](F-1).
r Rotate [MAIN DIAL] to select the desired GPS
Memory channel to be cleared.
t Hold down [CLR](F-3) for 1 second to clear the se-
lected Memory channel.
sh#LEAR/+vAPPEARS
y0USH;9%3=&FORSECONDTOCLEAR
sTo cancel clearing, push [NO](F-5).
u Push [MENU] two times to return to the “GPS”
screen.
[CALL/GPS] [MAIN DIAL][CLR][LIST]
[GPM] [YES] [NO]
LIST CLR ALM
GPM

ALL
Hold down
YES NO
GPM
ALL Clear OK?
EDTADD CLR ALM
GPM

00:
Hold down
YES NO
GPM
Clear OK?
LIST CLR ALM
GPM

A :
Hold down
YES NO
GPM
BANK Clear OK?