Icom IC-9100 - Data Extension; Time Stamp; GPS-A Symbol; Ssid

135
9
GPS/GPS-A OPERATION
N GPS Set mode (Continued)
$ATA%XTENSION20. * $EFAULT/&&
Set the data extension capability to “Course/Speed”
or OFF.
When you select “Course/Speed,” the transceiver’s
course and speed information is transmitted along with
the position data.
./4% When “Course/Speed” is selected, “Com-
ment (Extension)” appears instead of “Comment,”
and number of characters is limited to 36.
4IME3TAMP21. * $EFAULT/&&
Select either the DHM or HMS format to transmit the
current UTC (Universal Time Coordinated) time as a
time stamp, or turn OFF the function.
s/&& $OESNOTTRANSMITTHETIMEINFORMATION
s$(-4RANSMITSTHETIMESTAMPINTHE$AY(OUR
and Minute format.
s(-34RANSMITSTHETIMESTAMPINTHE(OUR-INUTE
and Second format.
'03!3YMBOL22. *
$EFAULT(OUSE14(6(&
Select the desired GPS-A symbol which represents
your means of transportation.
Selectable symbols:
!MBULANCE"US&IRE4R U CK "ICYCLE9A C H T  (ELICOPTER
Small Aircraft, Ship, Car, Motorcycle, Balloon, Jeep,
RV, Truck, Van, House QTH (VHF) and Other
If there is no symbol you want to use, you can make a
desired symbol code, as described below.
s3YMBOLPROGRAMMING
q Rotate [MAIN DIAL] to select “Other.”
s;%$4=&ANDTHECURRENTSYMBOLCODEAPPEAR
w Push [EDT](F-4) to enter the programming mode.
s!CURSORBLINKSONTHElRSTDIGIT
e Rotate [MAIN DIAL] to select the first digit character
to input.
5SABLECHARACTERSb<TO!TO:
r Push [≈](F-3) to select the second digit.
s!CURSORBLINKSONTHESECONDDIGIT
t Push [F-1] one or more times to select the desired
character type.
#HARACTER
TYPE
3ELECTABLECHARACTERS
ABC A to Z
abc a to z
etc
<" ’ ` ^ + – 1b
[ ] { } ¦ _ ¯ @ (space)
y Rotate [MAIN DIAL] to select the second digit char-
acter to input.
When inputting numbers or a decimal point, push
the appropriate keypad key.
u Push [MENU] to save the symbol code, and return
to the “SET” screen.
When “Other” is selected, check the symbol codes of
APRS
®
, and set them correctly.
SSID23. * $EFAULT
To assist in identifying a station’s type, the displayed
APRS
®
based SSID is added after the GPS-A data
call sign.
s  $OESNOTUSEANY33)$(OWEVERIFYOU
use a capital letter, it will be used as an
SSID.
%XAMPLE
  *!95!¨*!95!
  *!95!!¨*!95!!
s  .O33)$)FYOUUSEACAPITALLETTERITWILL
be deleted.
%XAMPLE
  *!95!¨*!95!
  *!95!!¨*!95!
sTO !DDS AN33)$ OF TO TO YOUR CALL
sign. If you use a capital letter, it will be
replaced with the SSID.
%XAMPLEhvISENTERED
  *!95!¨*!95!
  *!95!!¨*!95!
./4% If you have multiple transceivers, your call
signs are distinguished by a single capital letter in
the D-STAR* system. When you use an SSID, the
capital letter will be replaced by the SSID, depend-
ing on the setting.
* Appears when “GPS-A” is selected in “GPS TX Mode.”