21
1
PANEL DESCRIPTION
N Function display (Continued)
D&UNCTIONKEYSON--ENUDISPLAY
-ODE$6
#!,,3)'.+%9;#3=&(p. 85)
Push to display the “CS” screen.
s4HECURRENTCALLSIGNFOR$6OPERATIONAPPEARS
#!,,2%#/2$+%9;#$=&(p. 95)
Push to display the “CD” screen.
s4HECALLRECORDCHANNEL appears. (RX01 to RX20)
2#3+%9;2#3=&(p. 96)
Hold down for 1 second to copy and set the previously
received station call sign as the station call sign for
making a call.
52+%9;52=&(p. 101)
Push to display the “UR” screen.
s4HEDESIREDSTATIONORREPEATERCALLSIGNCANBESELECTED
$3%4+%9;$3%4=&(p. 118)
Push to enter the DV Set mode.
D&UNCTIONKEYSON$DISPLAY
-ODE$6(Only when “ ” is displayed.)
#!,,3)'.+%9;#3=&(p. 85)
Push to display the “CS” screen.
s4HECURRENTCALLSIGNFOR$6OPERATIONAPPEARS
#!,,2%#/2$+%9;#$=&(p. 95)
Push to display the “CD” screen.
s4HECALLRECORDCHANNEL appears. (RX01 to RX20)
2#3+%9;2#3=&(p. 96)
Hold down for 1 second to copy and set the previously
received station call sign as the station call sign for
making a call.
52+%9;52=&(p. 101)
Push to toggle the UR and the repeater call sign selection
screen
.
s4HEDESIREDSTATIONORREPEATERCALLSIGNCANBESELECTED
$3%4+%9;$3%4=&(p. 118)
Push to enter the DV Set mode.
D&UNCTIONKEYSON$DISPLAY
-ODE$6(Only when “ ” is displayed.)
3#!.+%9;3#!.=&
± Push to start or cancel the Access repeater scan.
(p. 100)
± Hold down for 1 second
to enter the Scan Set mode.
(p. 147)
3%,+%9;3%,=&(p. 100)
Hold down for 1 second to display the “SEL” screen.
(“R1USE” setting for the selected repeater)
!&#+%9;!&#=&(p. 69)
Push to turn the AFC function ON or OFF.
sh ” is displayed when the AFC function is ON.
$31+%9;$31=&(p. 114)
± Push to select a digital squelch function between
digital call sign squelch and digital code squelch.
± Hold down for 1 second to display the “DSQ” screen
(digital squelch).
4/.%#/.42/,3%4-/$%+%9;4#/.=&
(p. 169)
Push to enter the Tone Control Set mode.
The optional UT-121 is required for DV mode operation.
To Next Page
Loading...
