Icom IC-9100 - Confirming the Setting; Settings for UR and R2, Depending on the Communication Form

105
8
DV MODE OPERATION
N Calling a specific station (Continued)
D#ONlRMINGTHESETTING
q In the DR mode, p ush [MENU] one or more times to
display the “D1” screen.
w P ush [CS](F-1) to display the “CS” screen (Call
Sign).
e P ush [Z](F-1) one or more times to sequentially
DISPLAYTHEh52vh2vh2vORh-9vTOCONlRMTHE
current call sign setting.
./4% In the DR mode, you can change only the
h-9vCALLSIGNINTHE“CS” screen (Call Sign).
[CS]/[Z][MENU]
CS UR
JG3YMK
JA3YUA
MY
R1
JP3YHL
R2 JP3YHJ
Ú
MY call sign：
JA3YUA
Station call sign：
JG3YMK
Repeater q ： NARA43 (JP3YHL)
Repeater r ： IKOMA43 (JP3YHJ)
GRP3
D1
R 1 :NARA43
CS CD R>CS UR DSET
D3ETTINGSFOR“UR”AND“2”DEPENDINGONTHECOMMUNICATIONFORM
$ESTINATION#1 $ESTINATION!NINDIVIDUALSTATION
#OMMUNICATIONFORM,OCALAREACALL
CQ
s52SETTING#1#1#1
s2SETTING.!
#OMMUNICATIONFORM,OCALAREACALL
s52SETTING!NINDIVIDUALSTATION
s2SETTING./453%1
#OMMUNICATIONFORM:ONECALL
CQ
s52SETTING$ESTINATIONREPEATERTOSEND#1IN
the same zone
s2SETTING.!
#OMMUNICATIONFORM:ONECALL
s52SETTING!NINDIVIDUALSTATION
s2SETTING$ESTINATION REPEATER IN THE SAME
zone
#OMMUNICATIONFORM'ATEWAYCALL
CQ
s52SETTING$ESTINATIONREPEATERTOSEND#1
s2SETTING.!
#OMMUNICATIONFORM'ATEWAYCALL
s52SETTING!NINDIVIDUALSTATION
s2SETTING'7
./4% R1 setting is set to your access repeater’s call sign.