Icom IC-9100 - Page 179

170
14
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
4"7-)$,9. $EFAULT
-ODE33"
Set the lower cut-off frequency of the transmission
passband width for your mid setting to 100, 200, 300
or 500 Hz.
4"7-)$(10. $EFAULT
-ODE33"
Set the higher cut-off frequency of the transmission
passband width for your mid setting to 2500, 2700,
2800 or 2900 Hz.
4"7.!2,11. $EFAULT
-ODE33"
Set the lower cut-off frequency of the transmission
passband width for your narrow setting to 100, 200,
300 or 500 Hz.
4"7.!2(12. $EFAULT
-ODE33"
Set the higher cut-off frequency of the transmission
passband width for your narrow setting to 2500, 2700,
2800 or 2900 Hz.
The optional UT-121 is required for DV mode operation.