36
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
&REQUENCYBAND(&-(Z
q Hold down [BAND](MAIN/SUB) for 1 second one
or more times until a HF/50 MHz frequency band is
displayed.
w0USHABANDKEY;=TO;=OR;'%.%s=
s4HEPREVIOUSLYSELECTEDFREQUENCYANDOPERATINGMODE
are called up as the first band stacking register of that
frequency band.
e Select a frequency and an operating mode, and
then push the band key.
s4HESELECTEDFREQUENCYANDMODEAREMEMORIZEDAS
that frequency band’s first band stacking register.
r Select another frequency and operating mode, and
then push the band key.
s4HESELECTEDFREQUENCYANDMODEAREMEMORIZEDAS
that frequency band’s second band stacking register.
t Select another frequency and operating mode, and
then push the band key.
s4HESELECTEDFREQUENCYANDMODEAREMEMORIZEDAS
that frequency band’s third band stacking register.
y The first band stacking register set in step e, is
called up.
s7HENTHEFREQUENCYBANDKEYISPUSHEDTHEMEMO-
rized triple band stacking registers are sequentially
called up.
&REQUENCYBAND-(Z
q Hold down [BAND](MAIN/SUB) for 1 second one or
more times until a 144 MHz, 430 MHz or 1200 MHz
frequency band is displayed.
s4HEPREVIOUSLYSELECTEDFREQUENCY AND AN OPERATING
mode are called up as the first band stacking register of
that frequency band.
w Select a frequency and an operating mode, and
THENPUSH;'%.%s=
s4HESELECTEDFREQUENCYANDMODEAREMEMORIZEDAS
that frequency band’s first band stacking register.
e Select another frequency and operating mode, and
THENPUSH;'%.%s=
s4HESELECTEDFREQUENCYANDMODEAREMEMORIZEDAS
that frequency band’s second band stacking register.
r Select another frequency and operating mode, and
THENPUSH;'%.%s=
s4HESELECTEDFREQUENCYANDMODEAREMEMORIZEDAS
that frequency band’s third band stacking register.
t The first band stacking register set in step w, is
called up.
s7HEN;'%.%s=ISPUSHEDTHEMEMORISEDTRIPLEBAND
stacking registers are sequentially called up.
The optional UX-9100 is required for 1200 MHz frequency
band operation.
To Next Page
Loading...
