Icom IC-M91D - DSC Operation - Reply Procedures; Transmitting Polling Replies; Transmitting Position Report Replies

31
8
DSC OPERATION
N
ew
2001
N
e
w
Transmitting an Individual Acknowledgement (continued) D
Select one of three options, then push [ENTER]. e
• Able to Comply : Make an acknowledgment call without
any changes.
• Unable to Comply : You cannot make a communication.
The Acknowledgement call (‘Unable to
Comply’) can be automatically trans-
mitted, if set. See page 66 for details.
• Propose New Channel : You can make an acknowledgement
call, but you specify the intership chan-
nel. Select a desired intership chan-
nel, using [Y](CH)/[Z](CH), then push
[ENTER].
The Individual ACK confi rmation screen is displayed. r
Push [CALL] to transmit an acknowledgement call.
The screens shown below are displayed. t
Reply to the call using the microphone. y
Push [EXIT] to return to the normal operating mode. u