Icom IC-M91D - DSC Operation - Received Call Logs; Receiving DSC Calls (Distress Alerts); Received Call Log Management

32
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Manual ACK:
Enter “INDIVIDUAL ACK” in the DSC CALLS menu. q
❮MENU❯ ➪ ❮DSC Calls❯ ➪ ❮Individual ACK❯
(Push [MENU]) (Push [Y]/[Z] , then push [ENTER].)
• When no Individual call has been received, “Individual ACK” item
will not be displayed.
Select a desired individual address or ID code to reply to, w
using [Y]/[Z], then push [ENTER].
Perform steps ee to u, as described in “Quick ACK:,” be-
ginning on the previous page.
Transmitting a Group call D
The Group call function allows you to transmit a DSC signal
to only a specifi c group.
Enter “GROUP CALL” in the DSC CALLS menu. q
❮MENU❯ ➪ ❮DSC Calls❯ ➪ ❮Group Call❯
(Push [MENU]) (Push [Y]/[Z] , then push [ENTER].)
Select the desired preprogrammed group address or w
“Manual Input,” using [Y]/[Z], then push [ENTER].
• The ID code for the Group call can be set fi rst. (p. 21)
• When “Manual Input” is selected, set the 8 digit ID code for the
group you wish to call.
Select a desired intership channel using [ e Y](CH)/[Z](CH),
then push [ENTER].
• Intership channels are already preset into the transceiver in the
recommended order.