ROCKY-4786EV/EVG User Manual
Page 90
channel
On Chip Serial ATA [Disabled]
The On Chip Serial ATA (SATA) option allows you to determine the operational status of
the onboard SATA controller.
Disabled
(D
EFAULT) The SATA controller is disabled
Auto
The SATA controller is automatically arranged
by the BIOS
Combined Mode
PATA and SATA modes are combined together.
A maximum of 2 IDE drives in each channel
Enhanced Mode
Enable both PATA and SATA. A maximum of 6
IDE drives are supported.
SATA Only
SATA is operating in legacy mode.
x PATA IDE Mode [Secondary]
When the On Chip Serial ATA option is in the combined mode, the PATA IDE Mode will
be selected as secondary.
SATA Port
The SATA Port parameter is automatically detected by the system BIOS and shown on
the screen. This parameter is not user configurable.
5.5.2 Onboard Device
The Onboard Device menu (BIOS Menu 10) allows you to change the USB, Audio and
LAN device configurations.
To Next Page
Loading...
Need help?
General
