IEI Technology ROCKY-4786EV User Manual

ROCKY-4786EV/EVG User Manual
Page 95

Enabled
Select this option if FDDs are connected to the board
and will use the onboard FDD controller.
 Onboard Serial Port 1 [3F8/IRQ4]
The Onboard Serial Port 1 option allows you to select the I/O address and IRQ for the
onboard serial port. The serial port can be disabled or the I/O address and the IRQ can be
automatically selected by the BIOS. The options are listed below:
 Disabled
 3F8/IRQ4 (D
EFAULT)
 2F8/IRQ3
 3E8/IRQ4
 2E8/IRQ3
 Auto
 Onboard Serial Port 2 [2F8/IRQ4]
The Onboard Serial Port 2 option allows you to select the I/O address and IRQ for the
onboard serial port. The serial port can be disabled or the I/O address and the IRQ can be
automatically selected by the BIOS. The options are listed below:
 Disabled
 3F8/IRQ4
 2F8/IRQ3 (D
EFAULT)
 3E8/IRQ4
 2E8/IRQ3
 Auto
 UART Mode Select [Normal]
The UART Mode Select option allows you to select the UART mode for the system.

IrDA
IrDA is set as the IR serial mode. If this option is
selected, COM2 will be disabled.

ASKIR
ASKIR is set as the IR serial mode. If this option is
selected, COM2 will be disabled.
StockCheck.com

IEI Technology ROCKY-4786EV Specifications

General

Brand	IEI Technology
Model	ROCKY-4786EV
Category	Computer Hardware
Language	English