ROCKY-4786EV/EVG User Manual
Page 74
to access the boot sector or HDD partition table.
NOTE:
Many disk diagnostic programs can cause the above warning message to
appear when the program attempts to access the boot sector table. If you
run such a program, it is recommended that you first disable the virus
protection function before hand.
CPU L1 & L2 Cache [Enabled]
The CPU L1 & L2 Cache option allows users to select whether the CPU primary cache
(L1) and secondary cache (L2) will be turned on or off.
Enabled
(D
EFAULT) The L1 and L2 CPU caches are both turned on
Disabled
The L1 and L2 CPU caches are both turned off
Quick Power On Self Test [Enabled]
The Quick Power On Self Test configuration option speeds up the POST after you turn
on the computer. If it is set to Enable, BIOS will shorten or skip some check items during
POST.
Enabled
(D
EFAULT) Quick POST will occur after the computer is turned on
Disabled
Normal POST will occur after the computer is turned on
Boot Device
There are three Boot Device configuration options. They are:
First Boot Device [D
EFAULT: Hard Disk]
Second Boot Device [D
EFAULT: Hard Disk]