ROCKY-4786EV/EVG User Manual
Page 75
Third Boot Device [DEFAULT: LS120]
The Boot Device configuration options allow you to select the order of devices the
computer will boot from. Using the default values, the system will first look for an HDD to
boot from. If an HDD is unavailable then the system will boot from a LS120 drive.
Boot Device configuration options are:
Hard Disk
CDROM
ZIP100
USB-FDD
USB-ZIP
USB-CDROM
LAN
Disabled
Floppy
LS120
Boot Other Device [Enabled]
The Boot Other Device option determines whether the CPU card will use a second or
third boot device if the first boot device is not found.
Enabled
(D
EFAULT) The system will look for second and third boot devices if
the first one is not found.
Disabled
The system will not look for second and third boot device
if the first one is not found.
Swap Floppy Drive [Disabled]
The Swap Floppy Drive option is effective only in systems with two floppy drives.
Selecting Enabled assigns physical drive B to logical drive A, and physical drive A to
logical drive B.
Enabled
Assigns physical drive B to logical drive A, and physical
drive A to logical drive B.
To Next Page
Loading...
Need help?
General
