ROCKY-4786EV/EVG User Manual
Page 94
keyboard's wake-up or power-on button to start up
the computer.
x KB Power ON Password [Enter]
The KB Power ON Password option can only be specified if you have selected the
Password as the POWER ON Function option. To set the password, place the cursor on
the password option and click “E
NTER.” You will be prompted to enter a password. Select
you password and press “E
NTER.” You will be asked to confirm the password. Confirm it
and then press “E
NTER” and the password will be set.
x Hot Key Power ON [Ctrl-F1]
The Hot Key Power ON option can only be specified if you have selected the Hot KEY as
the POWER ON Function option. The following key combinations can be selected as the
hot keys that will turn your computer on.
Ctrl-F1
Ctrl-F2
Ctrl-F3
Ctrl-F4
Ctrl-F5
Ctrl-F6
Ctrl-F7
Ctrl-F8
Ctrl-F9
Ctrl-F10
Ctrl-F11
Ctrl-F12
Onboard FDC Controller [Disabled]
The Onboard FDC Controller allows you to select whether the onboard floppy controller
will or will not be used.
Disabled
(D
EFAULT) Disable this option if you use an adapter for your FDDs
or if you have no FDDs connected
To Next Page
Loading...
Need help?
General
