ROCKY-4786EV/EVG User Manual
Page 76
Disabled
(D
EFAULT) Default physical/logical drive assignations.
Boot Up Floppy Seek [Enabled]
During the POST, BIOS will determine if the floppy disk drive installed has 40 or 80 tracks.
360K FDDs have 40 tracks while 760K, 1.2M and 1.44M FDDs all have 80 tracks
Enabled
(D
EFAULT) BIOS searches for a FDD to determine if it has 40 or 80
tracks. Note that BIOS cannot tell the difference between
720K, 1.2M or 1.44M drives as they all have 80 tracks.
Disabled
BIOS does not search for the type of FDD drive by track
number. Note that there will not be any warning message
if the drive installed is 360K.
Boot Up Numlock Status [On]
The Boot Up Numlock Status option allows you to determine the default state of the
numeric keypad.
Off
The keys on the keypad will be arrow keys
On
(D
EFAULT) The keys on the keypad will be number keys
Gate A20 Option [Fast]
The Gate A20 Option option refers to the way the system addresses memory above 1 MB
(extended memory). Setting Gate A20 to Fast improves system speed, particularly with
OS/2 and Windows.
Fast
(D
EFAULT) Lets the system chipset control Gate A20
Normal
A pin in the keyboard controller controls Gate A20
Typematic Rate Setting [Disabled]
Disabling the Typematic Rate Setting configuration option only allows one character to
appear onto the screen if a key is continuously held down. In other words, the BIOS will
only report the key is down. When this option is enabled, the BIOS will report as before,
To Next Page
Loading...
Need help?
General
