Image Vault PRO COMMAND - 4.4 CD-R or DVD-R Disk; 4.5 Troubleshooting Installation; 4.6 Hardware Specifications

25 Image Vault
®
PRO Command
At this point the DVR is operating properly and recording images. The system
is operating with default settings that are pre-programmed in the unit. Refer to
PARTIIforsoftwareinstructionstocongureandmonitortheunit.
4.4 CD-R or DVD-R Disk
Insert the blank CD-R or DVD-R disk into the CD/DVD-R drive on the front of the
unit. Image Vault will perform the necessary disk processing when it writes video
or setup data to the disk.
4.5 Troubleshooting Installation
Verify connections and that all components appropriate have power. If every-
thing appears connected correctly per Section 2, contact your local Image Vault
distributor or call Image Vault directly at 1.888.462.4382.
4.6HardwareSpecications
Dimensions (typical): 18.5” (D) x 17” (W) x 7” (H)
Power: 115/230 V
AC
; 6/3 Amp; 60/50 Hz
Operating Temperature: 41 to 104°F (5 to 40°C)